Papers in collection

• Assessment of main factors contributing to the height of fracturing above longwall panels – a review and case-based numerical study Go to Paper
• Development of new performance prediction models for a raise boring machine based on indentation tests Go to Paper
• Underground rock bolt detection Go to Paper
• Automated omission-free geotechnical deformation monitoring – a new method deployable by non-specialists Go to Paper
• Caving characteristics and support loading of longwalls in massive strata Go to Paper
• Tight slot blasting for routine fault-slip seismicity control at Mt Charlotte Mine Go to Paper
• Dynamic fracture mechanism of thermally degraded brittle rock under impact load Go to Paper
• Some considerations on rock dynamics issues in Mars Go to Paper
• Lunar sub-surface temperatures Go to Paper
• A quantitative risk assessment tool for geothermal outbursts at Lihir Gold Mine Go to Paper
• Design, implementation and field performance of a face destress blasting method for mine development Go to Paper
• Longwall face floor failure assessment using a semi quantitative risk rating methodology Go to Paper
• Outbursts, coal bursts and rock bursts Go to Paper
• Analysis of horizontal opening stability in lunar regolith Go to Paper
• Investigation of the internal mechanical structure of Mars based on geometrical patterns of faults Go to Paper
• Analysis and Design of Faceroad Roof Support (ADFRS) Go to Paper
• The emerging role of the operational geotechnical engineer Go to Paper
• Measuring the influence of a sublevel cave on open stoping at Telfer Go to Paper
• Slope radar monitoring – a partnership and infrastructure case study of scalability, reliability and availability Go to Paper
• Developments in the measurement of stress in rock Go to Paper
• Characterising coalmine roof using measurement-while-drilling technology Go to Paper
• Underground mining subsidence in mine planning and risk assessment for cave mining Go to Paper
• Study of prevention methods for stress corrosion cracking in underground coalmines Go to Paper
• Characteristics of seismicity in the vicinity of a major dyke in a longwall coalmine Go to Paper
• 3D limit equilibrium and finite element model development for coalmine slopes Go to Paper
• Some considerations on rock slope stability issues in Afghanistan with an emphasis on Kandahar Region Go to Paper
• Multi-factor integrated data analytics and data-driven decision-making for ground control management Go to Paper
• The necessity of 3D analysis in open pit, rock slope, stability analysis – in theory and practice Go to Paper
• 30 years of seismic system design, implementation and interpretation Go to Paper
• Consideration of asymmetric drive geometry and conditions on the loading capacity of pastefill barricades Go to Paper
• Vivien Mine modelling back analysis to forecast ground conditions and ground support Go to Paper
• Generation of 3D planar failure hazard maps for pit slope management Go to Paper
• Integrated geotechnical audits and benchmarking for mining operations Go to Paper
• Photogrammetry-based mapping techniques in slope stability management Go to Paper
• A case study in managing a high consequence geotechnical risk in a Queensland coalmine Go to Paper
• An empirical system for primary and secondary support in US coalmines Go to Paper
• Development of a damage/failure mechanisms database for Kazakhstan underground mining industry Go to Paper
• Ground support systems at Rampura Agucha Underground Mine Go to Paper
• A global review of geotechnical challenges and ground support practices in sublevel caving mines Go to Paper
• Accurately defining failure geometries and their variability Go to Paper
• In situ dynamic testing of mesh straps and W-straps Go to Paper
• A design and construction methodology for deep mine development Go to Paper
• Data analytics and machine learning methods applied to underground coalmine roof convergence data Go to Paper
• Data cross validation for a newly commissioned dynamic drop test facility Go to Paper
• Algebraic optimisation of excavation alignment using the stress tensor Go to Paper
• Rock stress measurements – a site geotechnical toolkit Go to Paper
• A review of dynamic energy-absorbing cable bolts Go to Paper
• Assessing corrosion of reinforcement on a large scale Go to Paper
• Support structure design for rock burst damage restraint initiated by a low-intensity seismic wave Go to Paper
• Roof characterisation for hazard planning at Oaky North mine using geophysical data Go to Paper
• Admixture use in cemented rock fill Go to Paper
• Friction bolt performance over the past ten years in Australian mines Go to Paper
• Dynamic drop testing of Sandvik’s D47 and D39 MDX bolts at the Swerim’s testing facility Go to Paper
• Assessment of ground support requirements in coal burst-prone mines Go to Paper
• Fluid flow in discontinuous porous media with special reference to block caving of mines Go to Paper
• Simulation of weathering impact on weak rock Go to Paper
• Formation of fracture zones under static and impact loading conditions and their characteristics Go to Paper
• The coalmine roof rating – an update in its calculation and mechanistically why it works Go to Paper
• Optimal slope profiles for maximum mine pit-wall steepness in banded iron formation rocks Go to Paper
• An analysis of impact of weak rock formation on mining-induced deformation of rock slope Go to Paper
• Data mining in rock mining – predicting mechanical properties of carbonate rocks using hyperspectral remote sensing Go to Paper
• Using a Schmidt hammer to estimate geotechnical properties of carbonate rocks in Israel Go to Paper
• The risks and challenges of using Earth rock mass classification systems on the Moon Go to Paper
• Development of a visual measurement system of geomaterials under triaxial compression Go to Paper
• Evaluation of rock joint on construction tunnel face using convolutional neural network Go to Paper
• Estimation of rock brittleness for jointed specimens under cyclic triaxial loading Go to Paper
• Evaluation of smartphone photogrammetry for 3D surface roughness computation Go to Paper
• Effect of horizontal stress on shallow coalmine slopes Go to Paper
• Ore recovery on a room and pillar zinc mine Go to Paper
• Elastoplastic parameter change at claystone rock mass during sliding failure at Warukin Formation, Indonesia Go to Paper
• Integration of Geoblast and D&B Engineering as an engineering tool in PT. Indo Muro Kencana Go to Paper
• Implementation on stability of rock slope in abandoned quarry wall – Singapore case study Go to Paper
• An improved hydro-mechanical model for 3D rough-walled rock joints considering contact area during shearing Go to Paper
• The risk management and cost benefits of using a total monitoring approach to managing slope instability hazards in open pit mines Go to Paper
• Three-dimensional modelling and analysis of high-speed train-induced building vibration considering different soil types Go to Paper
• Managing steep seam dips and floor shears related dragline bench and lowwall instabilities Go to Paper
• A new test method for directional propagation of type-I rock cracks Go to Paper
• Deformation failure characteristics of rock-coal composites with different height ratios Go to Paper
• Use of fly-ash slurry in backfill grouting in coalmines Go to Paper
• The influence of the strain rate and pre-static stress on the dynamic mechanical properties of medium sandstone Go to Paper
• Multi-physical field coupling model development and parameter analysis of natural gas hydrate considering mechanical damage Go to Paper
• Creep properties and energy evolution characteristics of weakly cemented rock under step loading Go to Paper
• Analysis on crack distribution and evolution characteristics of gangue backfilled working face roof Go to Paper
• Mechanism analysis and particle flow simulation of water-sand inrush in thin bedrock working face Go to Paper
• Application of rock mass index in the prediction of mine water inrush and grouting quantity Go to Paper
• Development of rock testing system with changeable stiffness and test research on failure characteristics of rock Go to Paper