Active filters :
Discard Filter
News

Reminder: Metallurgical Society – Webinar: The Metallurgist’s role under JORC

The webinar is firstly aimed at metallurgists who act as a named CP (competent person for the purposes of the JORC guidelines), or in an advisory role to a CP, in company announcements covered by JORC.

Date: Thursday 24th September 2020

Time: 1.00pm – 2.00pm AEST

Digital Tech Talk: Online

Presenter: Dean David, Technical Director – Process, Wood

Cost:

AusIMM Member – Free

Member of an AGC Member Society (AIG, GSA, ASEG etc.) – Free

Non Member – $20.00

Register Now

Please note: Registrants who cannot join the digital tech talk at the scheduled time will receive a link to the recording to watch at a later time convenient to them.

Webinar Overview

The webinar is firstly aimed at metallurgists who act as a named CP (competent person for the purposes of the JORC guidelines), or in an advisory role to a CP, in company announcements covered by JORC.  Secondly, it is aimed at anyone acting as a CP that is not a metallurgist, but is taking advice from one. Thirdly, it is aimed at company directors, especially those whose resource projects have a material dependence on metallurgy for their revenue stream.

Webinar Overview cont.

Metallurgical factors fall under the classification of modifying factors in the JORC code. Modifying factors are used to convert resources into reserves as they are the basis for demonstrating economic viability. Recovery is a typical modifying factor as it reduces the payable metal that is present in the mined ore. Product Grade is another modifying factor and it has the potential to render a product unsaleable. Penalty elements in concentrates are also possible modifying factors, and in extreme cases problem elements can lead to rejection of the product from export or sale.

Metallurgical factors can be derived by assumption in Scoping Studies, limited testwork in PFS and definitive testing in FS. In all cases the metallurgist needs to understand the provenance of the numbers being used, and where sampling is involved rather than assumption, the representative nature of the samples tested. All metallurgical modifying factors must also be integrated into revenue calculations, and this should be done in a matter assessed and approved by the metallurgist.

JORC’s foundation principals of Materiality, Transparency and Competence will allow participants to know when they require metallurgical oversight and what to look for in the provider of that advice. Metallurgists will be better equipped to decide if they qualify as a CP (or expert advisor) for a given project and, if they accept, what is expected of them.

Presenter

Dean David – After Graduation in 1981 with a degree in Metallurgy from The South Australian Institute of Technology (now University of South Australia) Dean worked with CRA (now Rio Tinto) for 14 years in operations (NBHC Broken Hill and Argyle Diamonds) and on projects (Wimmera Industrial Minerals). For eight years Dean was a consultant with JKTech and for four of those years was manager of JKTech Consulting. Dean Joined Minproc in 2003 as Manager Process and, after a number of company name changes continues to work with the same team as Technical Director – Process for Wood in Perth. Dean is a member of the JORC and MetSoc committees.

Related News

12.10.20

AusIMM Metallurgical Society – Call for Committee Nominations

Nominations are now open to fill 5 (five) positions on the AusIMM Metallurgical Society (MetSoc) Committee for a 3 year term,...

06.10.20

Recording Now Available: Metallurgical Society Webinar - The Metallurgist's role under JORC

The webinar is firstly aimed at metallurgists who act as a named CP (competent person for the pur...

06.10.20

Metallurgical Society Delprat Distinguished Lecture - Southern QLD Branch

The Metallurgical Society Delprat Distinguished Lecture will be offered in Brisbane with live streaming of the pres...