Conference Proceedings
MINPREX 2000
Conference Proceedings
MINPREX 2000
Zinc Recovery From Commercial EAF Dust by the Iron-Reduction Distillation Process
Electric arc furnace (EAF) dusts contain significant quantities of zinc, found almost entirely as either zinc oxide or zinc ferrite. The dust has been classified as a hazardous waste due to the relative high lead, cadmium and hexavalent chromium contents. It is important that environmentally acceptable processes be developed to treat this waste. One possible process involves reacting the zinc compounds in the dust with metallic iron, thus avoiding zinc vapour reoxidation by CO2 as occurs in carbon reduction processes. It consists of two stages where the first is the reduction of iron oxides to iron and the second the reduction of zinc oxide to zinc vapour by the iron. In this work the effects of operating variables such as temperature, CO/CO2 ratio and pressure on the recovery of zinc from an industrial EAF dust obtained from the Smorgon Steel Mill were investigated. Zinc recoveries in the second stage were found to approach 100 per cent at 1000oC after about four hours in nitrogen but within 40 minutes if a low vacuum was used.
Contributor(s):
S Sukonthanit, N B Gray, D R Swinbourne, A Kyllo, C Somsiri
-
Zinc Recovery From Commercial EAF Dust by the Iron-Reduction Distillation ProcessPDFThis product is exclusive to Digital library subscription
-
Zinc Recovery From Commercial EAF Dust by the Iron-Reduction Distillation ProcessPDFNormal price $22.00Member price from $0.00
Fees above are GST inclusive
PD Hours
Approved activity
- Published: 1999
- PDF Size: 0.434 Mb.
- Unique ID: P200005066