Papers in collection

• Interfacial Chemistry in Flotation of Diasporic Bauxite Go to Paper
• Real-Time Simulation in Process Engineering - Dream or Reality? Go to Paper
• Recent Metallurgical Developments and their Impact on Minerals Project Execution Go to Paper
• Low Energy Zero Gas Emission Metals Directly from Ore using Geosequestration - A Minerals Processing Vision for the Future Go to Paper
• Water Recycling and Frugal Water Use Go to Paper
• Bio-Mineral Processing - Its Potential to Revolutionise the Industry Go to Paper
• Concentration of Igneous Phosphate Ores via Froth Flotation - Challenges and Developments Go to Paper
• Characterisation, Analysis and Simulation of Multiphase Particulate Systems Using High Resolution X-Ray Micro Tomography (HRXMT) Go to Paper
• Chemical Aspects of Sustainable Mineral Processing and a Framework for Research and Technology Transfer Go to Paper
• Nanoscience in Aqueous Processing Go to Paper
• The Importance of Mineral Processing Technology for Establishing a Sustainable Society with an Environmentally-Sound Material Cycle Go to Paper
• The Elephant in the Mill Go to Paper
• Maximising Value Add from Collaborative Research Go to Paper
• Automated Mineralogical Techniques - A Drive Towards Plant Optimisation Go to Paper
• Challenges on the Front End Activities of the Uranium Fuel Cycle - Areva's Approach Go to Paper
• Technology Based Innovation - The Next Decade Go to Paper
• Project Sustainability Assessment - Matching Method to Enterprise Size Go to Paper
• Digital Simulation of Particulate Processes Go to Paper
• Enhance Fine Particle Flotation by Hydrodynamic Cavitation Go to Paper
• Adsorption Behaviours of Humic Substances onto Iron Ore Particle Surface Go to Paper
• Possibilities and Working of the Specific Agglomeration of Fibrous Materials and Residues Go to Paper
• Agglomeration for Copper Heap Leaching Go to Paper
• Agglomeration Drum Selection and Design Go to Paper
• Comparison of Grinding and Liberation Processes for Stalky Biomass Materials as a Prerequisite for Production of Energy Pellets with High Calorific Value Go to Paper
• Improving Pelletisation of Pyrite Cinder by High Pressure Roller Grinding Go to Paper
• Study on Iron Ore Sintering with High Proportion of Specularite Concentrates Go to Paper
• Kinetic Study on the Leaching of Vanadium from LD Converter Slag Using Sulfuric Acid Go to Paper
• Rheological Behaviour of Clay-Rich Gangue Mineral Dispersions During Hydrometallurgical Treatment Go to Paper
• Stripping of Fe (III) from D2EHPA Using Different Reagents Go to Paper
• Recovery of Precious Metals from Chloride Solution by Magnetite Go to Paper
• Purification of Nickel and Cobalt from Heap Leaching Effluents Using Ion Exchange Resins Go to Paper
• Separation of Nickel and Cobalt from Manganese, Magnesium and Calcium by Synergistic Solvent Extraction - From Batch Tests to Pilot Plant Operation Go to Paper
• High Pressure Sulfuric Acid/Oxygen Leaching of Platinum Group Metals Bearing Ni-Cu Mattes Go to Paper
• Development of the Boleo Process Flow Sheet and the Direct Solvent Extraction (DSX) Circuit for Cobalt and Zinc Recovery Go to Paper
• Thermodynamics of Non-Cyanide Gold Solvents Go to Paper
• Application of Agitated Leaching for Iron Removal from Silica Using Sulfuric and Hydrochloric Acid Go to Paper
• Modelling of Synergistic Effect of Cyanex 302 and D2EHPA in Zinc Solvent Extraction Go to Paper
• Pilot-Plant Testing of Ammoniacal-Cyanidation for Gold Recovery from Copper Gold-Bearing Ore Go to Paper
• Treatment of Gold-Bearing Oxide High-Clayish Ores Go to Paper
• Beneficiation of Iron Ore - Washing with Surface-Active Agent Go to Paper
• An Investigation on the Effect of Chrysotile Particle Shape and Anisotropic Properites on the Rheology of Chrysotile Suspensions Go to Paper
• Demonstration of Solid-Liquid Separations Using Recycled Supernatant that Contains Temperature-Responsive Polymer Go to Paper
• Removal of As(III) and As(V) in Aqueous Solution Go to Paper
• Additional Attractive Force Between Alumina Particles Due to Low Solubility of Dicarboxylic Acids Go to Paper
• Effect of Anionic Surfactant on Silica Particle Attachment at the Oil-Water Interface Go to Paper
• Process Options for Difficult Arid-Region Nickel Laterites Go to Paper
• Biosorption of Cr(VI), Pb(II) and Zn(II) from Aqueous Solutions by Immobilised Phanerochaete chrysosporium Biomass in a Fixed-Bed Column Go to Paper
• On the Kinetics and Equilibrium Models for Biosorption of Ni(II) onto a Gram-Positive Bacteria Strain, Rhodococcus opacus, for Environmental Applications Go to Paper
• Bioleaching of Weathered Saprolite - Heavy Metal Adaptation Mechanisms of Aspergillus foetidus Go to Paper
• Development of Cost-Efficient Environmentally Sound Technology for Enhanced Gold Recovery from Rebellious Gold-Containing Raw Materials Go to Paper
• Bio-Oxidation of Arsenic and Stibium Bearing Gold Ores Go to Paper
• Pyrite Bioleaching and Slag Neutralisation - Two Treatments in a Single Process for Recovering Valuable Metals from Both Materials Go to Paper
• Column Bioleaching of a Low-Grade Nickel-Bearing Sulfide Ore Go to Paper
• Several Approaches to Enhance the Bioleaching of Enargite Go to Paper
• Bioremediation of Acid Mine Water Using Fly Ash and Desulfotomaculum nigrificans Go to Paper
• Bacterial Leaching of Complex Polymetallic Sulfide Ore Go to Paper
• Electrochemical Behaviour of Massive Chaclopyrite Bioleached Electrodes in Presence of Acidithiobacillus ferrooxidans and Acidithiobacillus caldus Go to Paper
• Kinetic Dependence of Refractory Gold Sulfide Biooxidation Using Different Microorganism Association Go to Paper
• Extraction and Characterisation of Extracellular Polymeric Substances from the Mineral Surface During Bioleaching of Chalcopyrite Concentrate Go to Paper
• Geological Parameters Controlling the Improvement of Manufactured Sand Using Vertical Shaft Impact Crushers Instead of Cone Crushers Go to Paper
• Cyclone Process for Heavy Metals Decontamination of Sediments Go to Paper
• Application of the Anaconda Simplified Work Index for Multiple Test Sizes Go to Paper
• Maghemite - A Source of Heavy Medium for Coal Washeries Go to Paper
• Separation of Minerals Using Electrical Fields Go to Paper
• Energy Savings and Technology Comparison Using Small Grinding Media Go to Paper
• Distribution of Settling Velocity of Irregular Particles and its Effect on Jig Separation Efficiency Go to Paper
• Recovery of Fine Gold Particles from Philippine Gold Deposits by Enhanced Gravity Concentration and Flotation Go to Paper
• Investigation on Multicomponent Semi-Autogenous Grinding Go to Paper
• An Innovative Process for Comprehensive Utilisation of Clay-Vanadium Ores Go to Paper
• Grinding and Flowing Investigation on Dry Stirred Ball Milling in Order to Determine the Influence of Grinding Aids Go to Paper
• Characterisation and Processing of Electronic Waste for the Recovery of Metal Values Go to Paper
• Separation of Iron Particles from Banded Haematite Quartzite (BHQ) Ore by Selective Magnetic Coating Go to Paper
• The Operation of the LAROX PF-50 Pressure Filter at Ellatzite-Med' Flotation Plant, Bulgaria Go to Paper
• Development and Validation of Ore Characterisation Test and its Use in Variability Campaigns of Comminution Circuits Go to Paper
• Removal of Arsenic in Fluorite Ore by Simultaneous Grinding-Leaching with NaHS Go to Paper
• Development of Underground Gold Processing Plants Go to Paper
• Laboratory-Scale Magnetohydrostatic Separator for High Resolution Density Analysis of Plastic and Other Wastes Go to Paper
• Beneficiation of Nickel Lateritic Ore from Montes Claros de Gois, Brazil Go to Paper
• CrusherMapperTM - A New Tool for Crusher Condition Monitoring Go to Paper
• Fine Gravity Separation in the Reflux Classifier, Exploiting a High Shear Rate, Laminar Flow Mechanism Go to Paper
• Evaluation of Grinding Medium Wear in Stirred Mills Go to Paper
• Python Underground Processing Plant Critical Design Go to Paper
• Study on Basic Theory of the Grain Settlement in Fluidised Bed Go to Paper
• Reduction of Iron Content from Silica by Gravitational Processes Go to Paper
• Effects of DA as a Grinding Aid on Selective Grinding of Low-Grade Bauxite Go to Paper
• Enhancement of Energy Efficiency in Fine Grinding of Copper Sulfide Minerals Using a Pilot-Scale Stirred Media Mill - IsaMill Go to Paper
• Comparing Energy Efficiency of Multi-Pass High Pressure Grinding Roll (HPGR) Circuits Go to Paper
• Two Variable Real-Time Algorithm for Cone Crusher Control Go to Paper
• Upgrading of Indonesia's Bauxite by Washing Method Go to Paper
• Particle Mechanics and the Design of Cyclone Tribochargers Go to Paper
• Advanced Jig Separation of Shredded Plastics Go to Paper
• Circulating Air Classification of Manufactured Sand Go to Paper
• Smarter Gravity Separation Using the Kelsey Centrifugal Jig Go to Paper
• The Autogenous Fine Grinding Kelsey Axial Displacement (KAD) Mill Go to Paper
• Test Work on High Throughput Diamond Tracer Recovery from Alluvial Recovery Tailings with a Containerised Optical Sorter Under Real Production Conditions Go to Paper
• Development of New Comminution Testing Methodologies for Geometallurgical Mapping of Ore Hardness and Throughput Go to Paper
• Validation of the JKMRC Rotary Breakage Tester (JKRBT) Ore Breakage Characterisation Device Go to Paper
• Simulation and Analysis of Media Behaviour in the Tower Mill by Discrete Element Method for Estimating the Power Draw and Spatial Distribution of Grinding Process Go to Paper
• Experimental Study of Ore Characterisation Methods for AG/SAG Mills Go to Paper
• Validation and Simulation of Optimised Compressive Crushing Go to Paper
• Study on Reasonable Mineral Processing Flow Sheet of Yunfu Low-Grade Pyrite Ores Go to Paper
• A Simulation Study on Two-Stage Grinding with High-Pressure Roller Mills Go to Paper
• Separating Particles by Horizontal Deflection in a Paramagnetic Fluid Go to Paper
• The Small Pebble Process for Reducing Ball and Power Consumption in Secondary Grinding Go to Paper
• Study on Ball Mill Grinding of a Cassiterite-Polymetallic Sulfide Ore Go to Paper
• The Effect of Grinding Aids on Laboratory Grinding of a Cassiterite-Polymetallic Sulfide Ore Go to Paper
• Triboelectric Charge and Separation Characteristics of Industrial Minerals Go to Paper
• Silica-Kaolin Sand Wet Sizing Go to Paper
• Approximation of Surface Area of Fines in Blast Induced Fragmentation Go to Paper
• Importance of Strain to Fragment Strength in Blasting Induced Pre-Conditioning Go to Paper
• Development of Grindability Tests Based on Direct Measurement of Energy Go to Paper
• Triboelectric Separation - Beneficiation of Coal Go to Paper
• Investigation of the Classification Operation in a Coal Pulverising Vertical Spindle Mill Go to Paper
• The Effect of Using Different Comminution Procedures on the Flotation of Platinum Group Minerals Go to Paper
• Trends in Test Filtration to Respond to Decreasing Sample Size Go to Paper
• New Developments in Spirals and Spiral Plant Operations Go to Paper
• Analysis of Electrostatic Separation for Rutile Cleaning Duty Using a Plate Electrode Assisted High Tension Roll Separator Go to Paper
• Eco-Efficient Gravity Separation Solutions in India Go to Paper
• Building the Unified Comminution Model Go to Paper
• Study on Preparation and Gel Performance of High Purity Montmorillonite Go to Paper
• Study on Desulfurisation and Deashing for Medium-High Sulfur Coal Using Shaking Table Go to Paper
• Haematite Recovery from a Tailings Stream Go to Paper
• Efficacy of Enhanced Gravity Separator in Processing Indian Iron Ore Slime Go to Paper
• A Robust Chemically Enhanced Electrostatic Separation Technology Go to Paper
• Near-Infrared Spectroscopy (NIRS) Sorting in the Upgrading and Processing of Skorpion Non-Sulfide Zinc Ore Go to Paper
• Grinding Mill Operation and Maintenance - Central to Asset Management Go to Paper
• TowerMill - Advantages in Wet Grinding Applications Go to Paper
• Rutile Beach Sand from Hard Rock Go to Paper
• A Loss of Strength of Gold Sulfide Concentrate Before Grinding and Cyanidation Using Magnetic Impulse Treatment Go to Paper
• Iron Ore - Mineral Processing Overview Go to Paper
• Development of Process for Beneficiation of Low-Grade Iron Ore Samples from Orissa, India Go to Paper
• Use of Impact Crushing for the Enrichment of Low-Grade Colemanite Concentrates Go to Paper
• Effects of High Pressure Grinding Rolls on Platinum-Bearing Ores and the Flotation Response as Compared to the Conventional Ball Mill Go to Paper
• SAG Mill Grinding Design Versus Geometallurgy - Getting it Right for Competent Ores Go to Paper
• Crushing Plant Process Optimisation Go to Paper
• The Research on Application of New Technologies in High Gradient Magnetic Separator with Horizontal Magnetic Line Go to Paper
• A Mechanistic Model of Batch Grinding in Ball Mills Go to Paper
• Comparative Studies on Balls Versus Spheroidal Tetrahedrons Working Media to Ore Grinding in an Industrial Drum Mill Go to Paper
• Flow Sheet Development of Three Geographically Distinct Chromium-Bearing Ores Go to Paper
• High Pressure Grinding Rolls Scale-Up and Experiences Go to Paper
• Implementation of an Energy Efficient Dry Grinding Technology into an Anglo-American Zinc Beneficiation Process Go to Paper
• The Physical Basis of Non-Random Breakage in an Iron-Oxide Ore Hosted Copper Gold Ore Go to Paper
• Study on Mineral Processing Technology for a Refractory Iron Ore Go to Paper
• Exploring the Breakage Environment in Mills with Discrete Element Methods Go to Paper
• Grinding and Beneficiation Characteristics of a Low-Grade Haematite Ore Go to Paper
• Fragmentation Characteristics of Iron Ores from Anshan, China Go to Paper
• Implementation of Fine-Screening in Preparation of KGHM PM SA Sandstone-Carbonate Copper Ore for Flotation Go to Paper
• Development of a New Dry Density Separator for Fine-Grained Materials Go to Paper
• Study on Dynamic Characteristics of Inertia Cone Crusher and Its Application Go to Paper
• A New Technology of Applying SLon-2500 Magnetic Separator to Recover Iron Concentrate from Abandoned Tails Go to Paper
• Spreadsheet Based Modelling of Liner Wear Impact on Charge Motion in Tumbling Mills Go to Paper
• Reason Analysis of Impurity Containing and Technology Discussion of Quality Improvement for Low-Quality Iron Concentrate Go to Paper
• Fine Coal Evaluation by Gravity Methods Go to Paper
• Research and Application of Vertical Screw Stirred Mill Go to Paper
• Study on Mineral Processing for a Cassiterite Ore in Southwest China Go to Paper
• Triboelectrostatic Producing Ultra-Clean Coal Go to Paper
• Recovery of Rhenium from Mineral Raw Materials of Kazakhstan Go to Paper
• Pressure Oxidation of Sulfide Gold-Bearing Concentrates with Double Refractoriness Go to Paper
• Comparison of Industrial Cyanide Destruction Processes Go to Paper
• Roasting of a Copper Sulfide Concentrate Go to Paper
• The Application of Roasting Pretreatment for Antimonial Refractory Gold and Silver Ores Go to Paper
• A Study of Extracting Vanadium from Stone Coal Using Cyclic Oxidation Go to Paper
• Carbothermal Reduction of Ilmenite Concentrates and Synthetic Rutile in Different Gas Atmospheres Go to Paper
• The Dynamics and Thermodynamics of Absorbing Lithium of Ion Sieve Preparing Pollymetallic Nodules Go to Paper
• Research on Reduction-Magnetic Separation of Bayan Obo Ore Go to Paper
• Study on Selective Reduction and Magnetic Separation of Low-Grade Nickel Laterite Ore to Produce High Nickel Concentrate Go to Paper
• Kinetic Behaviour of Solid/Solid Separation of Ultrafine Particles in Aqueous Suspension Go to Paper
• Effect of Activated Carbon on the Leaching of Cobalt-Rich Ferromanganese Crust in Sulfuric Acid Go to Paper
• The Development of a Non-Roasting Technology for Polymetallic Gold and Silver-Bearing Sulfide Concentrates Treatment Go to Paper
• Carbothermal Reduction and Nitridation of Ilmenite Concentrates and Chlorination of the Reduced Samples Go to Paper
• Recovery Process of Carbon Dioxide with Metal Oxides and Metal Hydroxides Go to Paper
• Removal of Arsenic in Enargite from Copper Ores by Flotation and Leaching in NaHS Media Go to Paper
• Characterisation of Manganese Ores Go to Paper
• Recovery of Vanadium from Stone Coal Through an Environmentally Friendly Acid Leaching Technology Go to Paper
• Roles of Mineral Impurities and Sulfur in the Leaching Behaviour of Pre-Reduced Ilmenite Ores Go to Paper
• Thermal Processing of Petroleum Fly Ash for Vanadium Recovery Go to Paper
• Upgrading of Superfine Low-Grade Haematite Ores by Reverse Floatation Direct Reduction Low Intensity Magnetic Separation Process Go to Paper
• Microfluidic Solvent Extraction for Mineral Processing of Copper Leach Solutions Go to Paper
• Upgrading and Removing Phosphorus from Low-Grade and High Phosphorus Containing Iron Ores Go to Paper
• Preparation of MgO Nano-Particles with Magnesite Go to Paper
• Au-Ag Recovery from Complex Ore by Flotation Go to Paper
• Recovery Efficiency Study on Ilesha Placer Gold Ore by Flotation Using Locally-Sourced Frothers and Collectors Go to Paper
• An Integrated Study of Bubble-Particle Attachment Mechanisms Go to Paper
• An Investigation into the Flotation Behaviour of Pyrrhotite Present in the Merensky Orebody Go to Paper
• Temperature Sensitive Polymers as Efficient and Selective Flotation Collectors Go to Paper
• Cyclonic Separation Effect of Metallic Ores in Cyclonic-Static Micro-Bubble Flotation Column Go to Paper
• Treatment of the Siirt-Madenky Ores by Flotation Go to Paper
• The Effect of High Power Nanosecond Electromagnetic Pulses on Selectivity of Pyrite from Arsenopyrite Go to Paper
• Study on Flotation Experiment of Complex Copper-Lead-Zinc Polymetallic Sulfide Ore in High Altitude Area and its Industrial Application Go to Paper
• Research on the Differential Flotation of Iso-Floatable Lead-Zinc Sulfide Ore Go to Paper
• Behaviour of Bubble Clusters in a Turbulent Flow Go to Paper
• Effects of Hydrated Mg2+ on KCl Flotation Go to Paper
• Study on New Tungsten Beneficiation Technological Flow Sheet of Shizhuyuan Polymetallic Mine Go to Paper
• Processing of Hard-to-Treat Copper Ore and Flotation Middlings Using Chemical Treatment Go to Paper
• The Effect of Ionic Strength of Plant Water on Valuable Mineral and Gangue Recovery in a Platinum Bearing Ore from the Merensky Reef Go to Paper
• Inhibition of Bubble Coalescence by Salts and Sugars Go to Paper
• A Modelling Approach Using a Back-Calculated Induction Time to Predict Recoveries in Flotation Go to Paper
• Enhancing the Flotability of Gold-Bearing Ores by a Mixture of Collectors Go to Paper
• Adhesion of Escherichia coli onto Oxide Minerals - Extended DLVO Theory and Flotation Behaviour Go to Paper
• Applicaton of Agricultural Residues from Pyrolysis in Flotation of Black Coal Go to Paper
• Study on Separation Technology for Copper-Molybdenum Collective Concentrate Go to Paper
• Reverse Cationic Flotation of Iron Ores - Floatability of Amphiboles at Depression of Iron Oxides by Starch Go to Paper
• Optimisation of the Performance of Flotation Circuits Using a Genetic Algorithm Oriented by Process-Based Rules Go to Paper
• Detachment of Particles from Bubbles in a Stirred Cell Go to Paper
• The Effect of Non-Toxic Depressants in Chalcopyrite Flotation Go to Paper
• Beneficiation Studies of Dolomitic Rock Phosphate in Pursuit of Zero Waste Technology - A Case Study Go to Paper
• Concentration of Phosphate Ore by Flotation With/Without Desliming Go to Paper
• Flotation Performance Improvement by Air Recovery Optimisation on Roughers and Scavengers Go to Paper
• Mechanism of Modified Sodium Silicate on Fluorite Ore Flotation Go to Paper
• Flotation of Phosphate Gangue from Magnetite Fines - Non-Ionic Surfactant as Atrac Collector Modifier Go to Paper
• Effect of Grinding Media on the Flotation of Sulfide Minerals Go to Paper
• A Process for the Flotation of Chrysocolla Go to Paper
• Methods for Improving the Flotation Recovery of the Coarse Fraction of a Nickel Ore Go to Paper
• Spectroelectrochemical Investigation of Hydroxamate Reagents on Copper Oxide Minerals Go to Paper
• Plant-Based Trials of Monitoring of Coal Flotation Systems Using Electrical Impedance Spectrum Technique Go to Paper
• Effect of Hardwater on Selective Flocculation of Diasporic-Bauxite Go to Paper
• Study on the Reasonable Mineral Processing Technology of a Cu-Mo Ore Go to Paper
• Fast Adsorption Phenomena at Air/Liquid Interfaces Go to Paper
• Carrier Micro Encapsulation (CME) for Suppressing Pyrite Floatability and Oxidation in Coal Preparation Go to Paper
• The Metallurgical Development of an Enargite-Bearing Deposit Go to Paper
• Contact Angle Measurements on Lignite Surface Go to Paper
• Experimental Validation of a Flotation Cell Model Go to Paper
• Advances in Coarse Particle Recovery - Fluidised-Bed Flotation Go to Paper
• A Study on Main and Interaction Effects of Operating Variables of Column Flotation Go to Paper
• Influence of Frothers on Bubble Shape and Velocity Close to the Generation Point Go to Paper
• Development of Technology for Complex Uranium Ores Processing on the Flotation Process Basis Go to Paper
• Role of Bubbles in the Action of Flotation Agents Go to Paper
• An Investigation of Cobalt Recovery on a Complex Oxidation Mine with High Per Cent of Mud Go to Paper
• Sulfidisation Promotion Effect of Ammonium Sulfate on the Flotation of Copper Oxide Ores Go to Paper
• Investigation of the Effect of N-Substituents on Performance of Thioureas as Special Collectors for Copper Sulfides by ab Initio Calculations Go to Paper
• A Study on Process Mineralogy and Mineral Processing of Complex Carbon-Bearing Cu-Pb-Co-Ni Multi-Metal Sulfide Ore by Bulk Flotation Go to Paper
• Adsorption of Starch on Kaolinite Surfaces Go to Paper
• Electrochemistry Measurement, Using Chena Analyser, to Investigate Selective Separation of Pentlandite and Pyrrhotite Go to Paper
• Investigation on Sheelite Floatability by Particle Size Fraction Go to Paper
• Improving Pentlandite Selectivity Over Pyrrhotite Using Reagents Go to Paper
• The Effect of Molecular Weight on the Adsorption and Efficacy of Polysaccharide Depressants Go to Paper
• Bubble Load Measurements in Flotation - A Critical Review of Current Practice Go to Paper
• Peculiarities of Quartz Distribution in Zinc Flotation Products and their Influence to Mineral Processing Go to Paper
• Effect of Hydrophobicity and Frother Concentration on Bubble-Particle Interactions in Turbulent Flow Go to Paper
• Upgrading of MgO in Dolomite Ore by Froth Flotation Go to Paper
• A New Cell for Electrochemically Aided Flotation Go to Paper
• Valuable Components Recovery from Lead-Zinc Metallurgical Slag Go to Paper
• Flotation Research on Cassiterite of Tailings Go to Paper
• Electro-Flotation Research on Fine Cassiterite Go to Paper
• Study on Rational Process Flow Sheet for Beneficiating Low-Grade Cu, Mo, Bi, S, W Polymetallic Ore Go to Paper
• Adsorption Isotherm Measurement of Sodium Oleate on Haematite Using Differential Thermal Analysis Go to Paper
• Retreating Cu-Mo Rougher Tailing by Flotation for Concentration of Copper and Molybdenum Go to Paper
• Development of a Froth Dropback Measurement Device Go to Paper
• Effect of pH and Chain Length on the Flotation Separation of Fluorite from its Synthetic Mixtures with Calcite and Dolomite with Imino-Bis-Methylene Phosphonic Acid Go to Paper
• Effectiveness of Lead as an Alternative to Copper Activation in Gold Bearing Iron Sulfide Flotation Go to Paper
• An Evaluation of Froth Recovery Measurement Techniques Go to Paper
• Frother-Depressant Interactions in Two and Three Phase Systems Go to Paper
• Flotation Circuit Optimisation - Towards More Sustainable Practice Go to Paper
• Promoters for Soap Flotation of Phosphate Minerals Go to Paper
• An Application of Depressant BK510 in Separation of Molybdenite and Bismuth by Flotation Go to Paper
• Wetting Characteristics of Mineral Surfaces - Contact Angle Measurements through Molecular Dynamics Simulations Go to Paper
• Predicting Water Recovery from Flotation Cells Go to Paper
• Recovery of Pentlandite and Chalcopyrite from Tailings by Bi-Cyclone Powerful Flotation Column Go to Paper
• Influence of Grinding Media on the Flotation of Carbonate Using Sodium Oleate as Collector Go to Paper
• The Mineralogical Researches of Gold Ores and Technological Products at Operating Factory in Olympiada Mine (Russia) Go to Paper
• Effect of Matching Relationship Between Bubble Size and Particle Size on Kaolinite Flotation Go to Paper
• Study on the Recovery of Zinc Minerals from the Tailing of a Lead and Zinc Mineral Processing Plant Go to Paper
• Study on the Mineral Processing Technology of Low-Grade Refractory Lead-Zinc Oxide Ores Containing Argillaceous and Carbonated Gangue in Yunnan Go to Paper
• Assessment of the Consistency Between Different Laboratory Froth Stability Measurements Go to Paper
• The Harmonious Design on the Beneficiability for the Pt-Pd Ores Containing High MgO Gangue in Yunnan Go to Paper
• Slime Flotation Using Ethoxylated Surfactants in Solutions of the Electrolytes Go to Paper
• Research and Tests on Improving the Technology of Enrichment of the Copper-Molybdenum Ore Go to Paper
• Possibilities for Flotation Acoustics Monitoring - A Review Go to Paper
• The Rate Variable Batch Test (RVBT) - A Research Method of Characterising Ore Floatability Go to Paper
• On the Role of Dixanthogen in Froth Flotation Go to Paper
• Study on Mechanism of Sphalerite Flotation in the Presence of Main Metal Ions by Molecular Mechanics Go to Paper
• Correlation of Air Recovery with Thin Film and Froth Stability in Flotation Go to Paper
• Flotation of Composite Synthetic Particles Go to Paper
• Study on Beneficiation Technology of a Refractory Fluorite Ore in North China Go to Paper
• Study on the Effects and Mechanics of Na2SO3 to Chalcopyrite and Galena Go to Paper
• The Effects of Collector and Grinding Environment on the Flotation Selectivity of Rosh Pinah Pb/Zn Ore Go to Paper
• Improvement of Phosphate Ore Flotation Performance Through Sized Flotation Go to Paper
• The Significance of Internal Recycle in Froth Flotation Go to Paper
• The Direct and Indirect Effects of the Reagent Suite on Froth Stability in Laboratory Scale Batch Flotation Tests Go to Paper
• Generation and Attachment of Submicron Size Bubbles to Colloidal Solids Go to Paper
• Effect of Spacer Chain Length on the Flotation of Kaolinite and Quartz by Using Gemini Surfactants as Collector Go to Paper
• Certain Molybdenum Resources in Indonesia Mineralogical and Processing Study Go to Paper
• Study on Mineral Processing of Refractory Copper-Nickel Ore Go to Paper
• Experiment of Improving the Quality and Decreasing the Impurity of Titanium Concentrate in Panzhihua Mine in China Go to Paper
• The Detachment of Coarse, Composite Particles from Bubbles Go to Paper
• Process Study on Some Ag-Cu-Pb-Zn Polymetallic Ore in South China Go to Paper
• A Novel Diagnosis and Evaluation Procedure for Flotation Plants Go to Paper
• Study on Flotation of the Low-Grade Magnesite Ore Go to Paper
• The Purification of Low-Grade Quartz Ore by Flotation and its Mechanism Go to Paper
• Research on Universal Depressant of Talc and Serpentine Go to Paper
• Technical Challenges in the Flotation of Molybdenite from Porphyry Copper Ores Go to Paper
• The Study of Jamesonite Flotation Behaviour Go to Paper
• Study on Pure Mineral Flotation Tests of Low-Grade Phosphate Ore in Zhijin, Guizhou Province, China Go to Paper
• An Ammonia Leaching-Solvent Extraction-Electrowinning-Flotation Process for Copper Oxidised Ore Treatment Go to Paper
• Study on the New Flow Sheet and Wastewater Recycling for Xiaoliuguo Copper-Bearing Low-Grade Scheelite Ore Go to Paper
• Flotation of Smithsonite by Using Siloxane Cationic Surfactants as Collectors Go to Paper
• Study of Bauxite Separation by Using Flotation Column Go to Paper
• The New Technology of Enrichment of a Fine Low-Grade Tungsten from Complex Multi-Metallic Ore Go to Paper
• The Performance of Benzyl Arsonic Acid as a Collector in the Flotation of Wolframite and Cassiterite Slime Go to Paper
• Autogenous-Carrier Effect and Gangue Influence in Fine Particle Flotation of Ilmenite/Titanaugite System Go to Paper
• Satellite Image Based Strategies to Evaluate the Impact of Dismissed Mine Site - An Application to the Mae Moh Coal Mine Area in the Lampang Province, Thailand Go to Paper
• Choosing an Effective Dust Suppressant Go to Paper
• The Role of Mineral Processing in the Development of Cement with Low Carbon Emissions Go to Paper
• The Mineralogy and Reactivity of Pyrrhotite from Selected Nickel Ore Deposits and its Effect on Flotation Performance Go to Paper
• The Use of Automated Mineralogy to Interpret the Batch Flotation Performance of Merensky Reef Ore Go to Paper
• Surface Chemistry of Iron Ore Throughout a Processing Plant Go to Paper
• Phosphorus Phase Analysis of Medium-Low-Grade Rare-Earths-Bearing Phosphate Ores Go to Paper
• Advances in Optical Image Analysis and Textural Classification of Iron Ore Fines Go to Paper
• Selective Recovery of Platinum from Cobalt-Rich Crust Go to Paper
• Using Positron Emission Particle Tracking (PEPT) to Investigate Industrial Systems Go to Paper
• Determination of Flotation Kinetics of Coal Grain Types in a Pilot Scale Jameson Cell using Coal Grain Analysis Method Go to Paper
• Techniques Used and Problems Encountered in Normal and Reverse Circulation Drilling at the Mt Roseby Project, Cloncurry, North West Queensland Go to Paper
• The Effect of Bulk Iron Concentration on the Copper Activation of Sphalerite at pH 9 Go to Paper
• Research on the Thermodynamics of Siderite Roast Decomposition and the Experiment of Magnetic Roasting-Separation Go to Paper
• Using Mineral Maps to Rank Potential Processing Behaviour Go to Paper
• Geometallurgical Study of Copper Oxide Mineralisation Hosted in Gravels of Different Physical Quality Go to Paper
• The Effect of Mineral Liberation on the Floatabilities of Pyrite, Arsenopyrite and Arsenian Pyrite for Carlin Trend Ores Go to Paper
• Characteristics Analysis of a Bastnaesite Rare Earth Mineral for Recovery of Cerium Go to Paper
• How Particles Stick to Bubbles - The Influence of pH and Hydrophobicity in Flotation Go to Paper
• How to Evaluate Crushed Rocks for Concrete Production Go to Paper
• Adsorption of Alkylammoniums in the Interlayer of Montmorillonite and its Effect on the Viscosity of Organo-Montmorillonite Gels Go to Paper
• New Bio-Adsorber with Activated Carbon and Nano Tube Carbon for Separation of Nickel and Cadmium Go to Paper
• Determination of Porosity and its Influence on Specific Surface Go to Paper
• Significance of Ion Interactions in Flotation in Saline and Brine Solutions Go to Paper
• Ultrasonic Extinction for High Resolution Particle Size and Concentration Analysis Go to Paper
• Dynamics of Three Phase Contact Line Motion in Liquid-Liquid-Solid Systems - Impact of Surface Roughness Go to Paper
• A New Online Detection Method for Arsenic Minerals in Process Streams Go to Paper
• Similarities and Dissimilarities in Florida Phosphate Ore Types - Surface and Bulk Property Analysis of the Flotation Feed, Concentrate and Tails Go to Paper
• Mineral Changes that Occur During Coal Gasification Go to Paper
• Study on Influence that Styrene-Phosphoric has on the Surface Property of Rutile Minerals Go to Paper
• Study on the Interaction Mechanism of Flotation Reagents and Rare-Earths-Bearing Phosphate Ore Go to Paper
• The Beginnings of Mineral Processing Research in Canada - A Short Account Go to Paper
• Exerting the Advantages of National Key Discipline, Outstanding the Training of Engineering Capability, Cultivating Talent to be with Innovation Ability Go to Paper
• Earnest Advocacy - A Key to Sustainable Minerals Industry Education - A Philippine Experience Go to Paper
• Mineral Processing Engineering Education in China - Bringing up the Engineering Diathesis and Design Competence of the College Students Go to Paper
• 1880 - 1930 - The Golden Years of Mineral Processing Technology Go to Paper
• Mineral Processing Education in China Go to Paper
• Using Dynamic Simulation Throughout a Process Plant's Life Cycle Go to Paper
• Diagnostic Monitoring of Concentrator Circuits with Random Forest Models Go to Paper
• Real-Time Integration of Mining and Metallurgical Information for Efficient Use of Energy and Water Go to Paper
• Comparison of Discretised Population Balance (DPB) and Finite Element Method (FEM) Methodologies for Modelling Batch Gibbsite Precipitation Go to Paper
• Process Simulation and Plant Design of a Mineral Selective Magnetising Flash Roasting Plant Using Neutrons Go to Paper
• Modelling and Simulation to Design a Flotation Circuit for Gold Concentration Go to Paper
• The Influence of Particle Shape in Rock Fracture Go to Paper
• Effect of Lattice Impurities on Electronic Properties and Surface Adsorption of Sphalerite - A Density-Functional Theory Study Go to Paper
• Using DEM to Model Industrial Banana Screens Go to Paper
• Continuous pH and Pulp Potential Measurements During Complex Sulfide Ore Flotation Go to Paper
• Media Type Effect on Grinding Efficiency Go to Paper
• Techno-Economic Evaluation of a New Early Removal Process to Treat High-Arsenic Copper Ores Go to Paper
• Advances in Thickener Feedwell Design via Computational Fluid Dynamics Modelling Go to Paper
• Optimisation of the Advanced Automation System at Inmet Mining's Pyhsalmi Mine, Finland Go to Paper
• Discrete Element Method - Computational Fluid Dynamics Modelling of Flow Behaviour in a Stirred Mill - Effect of Operation Conditions Go to Paper
• Estimating Particle Size Fraction Proportions - A Multiscale Approach Using Multiple Kernel Learning Go to Paper
• Review on Some Research Methods of Mineral Crystal Chemistry and Computer Simulation on Flotation Go to Paper
• Modelling of Magnetic Carrier Separation Process Using Computational Fluid Dynamics Go to Paper
• Estimating Breakage of Fine Ore Particles by Media in a Small Ball Mill Using DEM Go to Paper
• Towards Improved Hydrocyclone Models - Contributions from Computational Fluid Dynamics Go to Paper
• Modelling Channel Scale Flow in Heap Leaching Using Smooth Particle Hydrodynamics (SPH) Go to Paper
• Application of Kriging in Approximations of Grained Materials Characteristics Distribution Functions Go to Paper
• Upgrading of a Flow Sheet Selection PC Algorithm for Refractory Concentrates Treatment Go to Paper
• Application of Discrete Element Method for Simulating Feeding Conditions and Size Reduction in Cone Crushers Go to Paper
• Evaluation of the Iron Blast Furnace Process using Heat and Material Balances of the Flame-Zone Go to Paper
• Dynamic Simulation of an Alumina Refinery Go to Paper
• Flow Sheet Simulation of Municipal Waste Treatment Processes Go to Paper
• Modelling and Optimisation of Direct Reduction of Iron Ore by Coal in a Rotary Kiln Go to Paper
• On Kinetic Coupling in Meso-Scale Phenomena in Mineral Froth Flotation Go to Paper
• Predicting Flotation Response from Liberation Information Go to Paper
• Performance of Outotec FloatForce Flotation Mechanism - A Study in Both Computational Fluid Dynamics and Industrial Scale Measurement Go to Paper
• Study on Oil Agglomeration Flotation for Deinking Go to Paper
• Tried, Tested and Proven - 300 m3 Flotation Cells in Operation Go to Paper
• Innovative and Resource-Preserving Washing Processes for Primary and Secondary Raw Materials Go to Paper
• Particle Size Measurement of TiO2 Nanoparticles in Non-Aqueous Solvent by Interactive Force Apparatus Under an Electric Field Go to Paper
• Mining Systems and Technology - Synchronous Electric Drives for Grinding Mills Go to Paper
• Research of 200 m3 Self-Suction Flotation Machine Go to Paper
• Research on the Design and Processing Characteristics of 320 m3 Air-Forced Mechanical Flotation Cell Go to Paper
• Acoustic Emission Monitoring of Froth Flotation Go to Paper
• Coal Preparation Research at Turkish Coal Enterprises (TKI) Go to Paper
• Economic Sustainable Power for Mineral Processing Go to Paper
• Efficiency, Economics, Energy and Emissions - Emerging Criteria for Comminution Circuit Decision Making Go to Paper
• Energy Dissipation in Long-Distance Slurry Pipelines Go to Paper
• Ecological Fuel from High-Sulfur-Content Coal Go to Paper
• Claiming the Green Revolution - Protecting Investment in Green Mineral Processing Go to Paper
• Recycling and Recovering Fine Particles from Auto Shredding Residue (ASR/SR) to Conserve Raw Materials and Protect Environment Go to Paper
• Improving the Sustainability of Primary Metal Production - The Need for a Life Cycle Approach Go to Paper
• Creating Value and Improving Environmental Performance by the Recovery of Valuable Products from Tailings from the Athabasca Oil Sands in Alberta, Canada Go to Paper
• Evaluation of Comminution Circuit Design for Sustainability Using EcoNomicsTM Go to Paper
• Commercialisation of Ni Heap Leaching at Murrin Murrin Operations Go to Paper
• Identifying Opportunities to Reduce the Consumption of Energy Across Mineral Processing Plants Go to Paper
• An Integrated Geology-Mine-Plant and Eco-Efficiency Simulator for Anglo Platinum's Evaluation and Operational Improvement Initiatives Go to Paper
• The Research on Refined Gold Bullions Surface Upgrading Go to Paper
• Real Time and In Situ Measurement of Elemental Composition Using Lasers Go to Paper
• Innovative Technology for Optimised Thickening Sedimentation Go to Paper
• Pipe Flow Stability of Concentrated Coal-Water Suspensions in the Presence of an Electric Field Go to Paper
• Effective Dry Density Benefication of Coal Go to Paper
• Electroosmotic Dewatering and Consolidation of Mineral Waste Tailings Go to Paper
• Bioleaching of E-Wastes Go to Paper
• Kinetics of Reclamation of E-Waste by a Bioleaching Route Go to Paper
• Adsorption Effect on Multi-Heavy Metal Ions in Wastewater by Water-Washing Waste Saccharomyces cerevisiae Go to Paper
• Validation and Application of Filtration Theory to Plate and Frame Pressure Filtration - From Laboratory to Full Scale Go to Paper
• Beneficiation of Coal Fines from Tailing Ponds of Tunbilek Washing Plant Go to Paper
• Recycling of Sludge from the Production of Manganese Go to Paper
• Copper Extraction from Scrap Cables by Biotechnological Means Go to Paper
• Experiments on High Efficiency Separation of Mixed Plastic Wastes by Vortex-Tube Separator Go to Paper
• Chelopech Mining EAD and Best Available Techniques for Management of Waste Rock in Mining Activities Go to Paper
• In Situ Bioremediation of a Heavily Polluted Alkaline Soil in a Uranium Deposit Go to Paper
• Combined Flow Sheet for Treatment and Recycling of Municipal Solid Waste (MSW) with Complex Morphological Composition Go to Paper
• Integrated Utilisation of Desulfurisation and Skimming Slag Go to Paper
• Iron Concentrate Synthesised from Waste Ferrous Sulfate Produced in Titanium White Preparation Go to Paper
• Coagulation-Neutralisation Technology to Treat Wastewater from Lead-Zinc Concentrator Go to Paper
• Size Separation Pretreatment and Alumina Recovery from Bayer Red Mud Go to Paper
• Old Copper Flotation Tailings Waste Reprocessing Go to Paper
• Lead Removal from Contaminated Soils with Chelating Agents Go to Paper
• Recovery of Tantalum Capacitors from Waste Printed Circuit Boards Using a Pneumatic Separator Go to Paper
• Copper Recovery from Printed Circuit Board by Carbonisation Go to Paper
• Investigation on Comprehensive Utilisation of Nickel Slag from JNMC Go to Paper
• Performance of Dry Separation Processes in Cenospheres Recovery from Coal Fly Ash Go to Paper
• Biosorption of Cadmium from Aqueous Solutions by Coconut Shell Powder in a Fixed Bed Column Go to Paper
• Physical/Chemical Treatment of Mercury-Contaminated Wastes from Former Chlorine-Alkali Electrolysis Plants - Application of Flotation Technologies in Soil Washing Plants Go to Paper
• Management of Mining Wastes in European Union and Developments in Turkey Go to Paper
• An Integrated Solid Waste Management Method for Western Macedonia, Greece Go to Paper
• Pressing-Drill Method - A Representative Method for Taking Analysis Samples from Recycled Materials Go to Paper
• Paste Thickening of Tailings at the Clermont Coal Preparation Plant Go to Paper
• Lean Iron Ore Beneficiation in India Go to Paper
• Study on Treatment of Wastewater Containing Heavy Metal Ions Using Modified Oceanic Cobalt-Rich Crusts Go to Paper
• Pilot-Scale Study of Deep Cone Thickener for Phosphatic Clay Dewatering Go to Paper
• Selective Removal of Arsenic from Acid Mine Drainage Containing Ferrous Ion Using Sulfide Precipitation Method Go to Paper
• Thickener Modelling - Incorporating Shear Effects Go to Paper
• The Acid Leaching Process for the Synthesis of Zeolitic Material from Paper Sludge Ash Go to Paper
• Analysis of Procedures and Drivers for Industrial Waste Management Go to Paper
• Bioleaching Metals from Waste Printed Circuit Boards and the Shapes of Microorganisms Go to Paper
• Characterisation of Computer Printed Circuit Boards for Hazardous Properties and Beneficiation Studies Go to Paper
• Removal of Thiocyanate from Solutions by Precipitation Go to Paper
• Clinoptilolite as a Low-Cost Solution to Remove Heavy Metals from Water in Mining and Mineral Processing Industry Go to Paper
• Frothing in Seawater Flotation Systems Go to Paper
• Application of Natural Zeolite for the Removal of Diethylenetriamine (DETA) and DETA-Metal Complexes from Flotation Process Water Go to Paper
• Mechanism Responsible for Flocculation in Poly (N-Isopropylacrylamide) Temperature Responsive Dewatering - Attractive Interaction Forces Induced by Surface Hydrophobicity Go to Paper
• Removal of Dilute Toxic Anions in Wastewater Using Aluminum Hydroxides Co-Precipitation Method Go to Paper
• Recycling of Process Water in Sulfides Processing and Flotation Selectivity Go to Paper
• Water Balancing in Mineral Processing - Issues and Opportunities Go to Paper
• Study on a Novel Polymer/Bentonite Compound Adsorbent for Removal of Cu(II) from Aqueous Solution Go to Paper
• Water Savings and Coal Product Compromise Go to Paper
• The Rehabilitation of Acid Mine Effluents and Toxic Heavy Metal Pollution, Emanating from Gold Mines in South Africa Go to Paper
• Remediation of Mine Seepage at Batu Hijau Go to Paper