Conference Proceedings
The AusIMM Proceedings 1936
Conference Proceedings
The AusIMM Proceedings 1936
Influence of Elements on the Properties of Lead. Part VII.-The Influence of Composition on the Creep Rate of Industrial Lead
During the past two years, a large number of creep tests has been carried out on electrolytic lead, special assay lead and ordinary refined (Port Pirie) lead. Some of these tests have already been reported.1 In addition, an attempt has been made to estimate the influence of the individual elements present in small traces in Port Pirie lead. The present paper gives the results obtained when small additions are made to "U" lead of the composition shown in Table 1.(which has been used throughout these investigations during the past few years). The additions were silver, antimony, bismuth and zinc. The results of the addition of tellurium have already been communicated. This investigation was intended to run parallel with a similar one using electrolytic lead as a basis and adding one element at a time.Actually, the experiments using "U" lead have got rather ahead of the others. The important point has emerged, however, that the effect of a .given addition may be appreciably influenced by the presence of traces of other elements.In most of these tests, an initial stress of 500lb. per sq. in. has been used. Whilst it is fully appreciated that this stress is higher than those used in practice, it has to be borne in mind that an improvement in creep resistance was *Manuscript received December 11th, 1936.
Contributor(s):
J N Greenwood, M Met, H K Worner
-
Influence of Elements on the Properties of Lead. Part VII.-The Influence of Composition on the Creep Rate of Industrial LeadPDFThis product is exclusive to Digital library subscription
-
Influence of Elements on the Properties of Lead. Part VII.-The Influence of Composition on the Creep Rate of Industrial LeadPDFNormal price $22.00Member price from $0.00
Fees above are GST inclusive
PD Hours
Approved activity
- Published: 1935
- PDF Size: 3.492 Mb.
- Unique ID: P_PROC1936_0423